GNSS Products

Documents

pdf Antenna Product Overview

pdf Comparing GNSS Antenna Performance

pdf White Paper – GNSS Antennas

pdf GNSS Antenna Presentation

pdf TW3072 Timing Antenna Install

pdf4000 Series White Paper – New Challenges for GNSS Patch Antennas

pdfTallysman TW4000 Series White Paper

pdfPatch Antennas for the New GNSS (GPS World Article Feb /12)

TW1015 Datasheet

TW1015 Compact Embedded GPS L1 Antenna

The TW1015 by Tallysman Wireless is a small, high performance, low profile, embedded GPS L1 antenna, specially designed for industrial, military, precision positioning and timing applications.

The TW1015 features a high performance custom tuned ceramic patch element, a very low noise amplifier (LNA) and a tight bandpass SAW filter. It covers the GPS L1 and SBAS (WAAS /EGNOS/MSAS) frequency band (1572.5 to 1578 MHz), and it offers great circular polarized signal reception, multipath rejection and out of band signal rejection.
The TW2015 comes in a compact circular form factor with a built-in 50 mm diameter ground plane, and with a 15 cm RG174 cable.

The TW1015 LNA gain is optimised to capture the LNA noise figure for OEM applications.

The built-in 35mm circular ground plane can be augmented with host system ground surfaces.

Tallysman offers custom services to assist with integration of the OEM module into end user solution.

Applications Features Benefits
  • High Accuracy & Mission Critical GPS
  • Precision Agriculture, Mining & Construction
  • Military & Security
  • Avionics
  • Law Enforcement & Public Safety
  • Fleet Management & Asset Tracking
  • Very low noise LNA: 1 dB
  • Great axial ratio: >4dB at Zenith
  • High rejection SAW filter
  • LNA gain: 16 dB typ.
  • Low current: 5 mA typ.
  • ESD circuit protection: 15 KV
  • Wide Supply voltage: fixed 2.7V to 10V
  • Low Profile: 7.25mm
  • Great multipath rejection
  • Increase system accuracy
  • Excellent signal to noise ratio
  • Great out of band signal rejection
  • Compact form factor
  • RoHS compliant

Specifications

Vcc = 3V, over full bandwidth, T=25°C

Antenna
Architecture Custom single-feed ceramic patch
Antenna Gain (70mm ground plane) 4 dBic at 90°
Axial Ratio 4 dB at 90°, 6dB at 20°
Electrical
Architecture LNA ->SAW filter or
Frequency/Bandwidth 1575.42 MHz +/- 10MHz
Polarization RHCP
Gain 15 dB min. (at 1575.42 MHz)
Out-of-Band Rejection
<1560 MHz
>1600 MHz
>1620 MHz

>25 dB
>30 dB
>35 dB
VSWR (at LNA input) <1.5:1
Noise Figure 1 dB typ.
Supply Voltage Range 2.7VDC to 3.3VDC
Supply Current 5 mA typ.
ESD Circuit Protection 15 KV air discharge
Mechanicals & Environmental
Mechanical Size 35 mm dia. x 7.5mm
Connectors Optional
Cable 1.48mm OD, 15 cm. Custom lengths optional
Operating Temp. Range -40 to +85 °C
Weight 50 g
Attachment Method Adhesive or screw mount
Environmental RoHS compliant
Shock Vertical axis: 50 G, other axes: 30 G
Vibration 3 axis, sweep = 15 min, 10 to 200 Hz sweep: 3 G
Warranty One year, parts and labour
Ordering Information
TW1015 – GPS L1 antenna 32-1015-x -yyyy (X= Connector type, yyyy = cable length in mm)
Download TW1015 Datasheet

The information provided herein is intended as a guide only and is subject to change without notice. This document is not to be regarded as a guarantee of performance. Tallysman Wireless Inc. hereby disclaims any or all warranties and liabilities of any kind. © 2010 Tallysman Wireless Inc. All rights reserved.