GNSS Products

Documents

pdf Antenna Product Overview

pdf Comparing GNSS Antenna Performance

pdf White Paper – GNSS Antennas

pdf GNSS Antenna Presentation

pdf TW3072 Timing Antenna Install

pdf4000 Series White Paper – New Challenges for GNSS Patch Antennas

pdfTallysman TW4000 Series White Paper

pdfPatch Antennas for the New GNSS (GPS World Article Feb /12)

TW120 Datasheet

TW120  25 dB GPS L1 In-line Amplifier

TW120 25 dB GPS Inline Amp

The TW120 by Tallysman Wireless is a rugged waterproof, low cost, low noise, low power, narrow band 25dB gain in-line amplifier, specially designed to tightly filter and boost weak GPS L1 signals, while maintaining low antenna noise figures. The TW120 provides for much longer cable runs from antenna to receiver, for applications such as mast-mount, roof-top and large vehicle installations, without any degradation of system sensitivity.

The TW120 passes DC directly from input to output to support centre conductor DC supply to the antenna, and so avoiding the need for an additional bias source or bias “T”.

Applications Features Benefits
  • GNSS and Telematics Systems
  • Wireless Telecom & Cellular Base Station Timing Applications
  • Commercial and Industrial Timing and Synchronization Applications
  • Very low noise
  • Wide input voltage range, 3 to 10 VDC
  • Powered via antenna coax from receiver
  • 50 Ohm port impedance
  • Cylindrical nickel-plated brass, IP67 compliant housing
  • Gold-plated SMA & TNC Jack connectors
  • RoHS compliant
  • Improves signal reception
  • Enables extended cable runs
  • Avoid installation of costly low-loss cable
  • Fits in-line with antenna cable
  • No external voltage supply needed
  • Maintains low antenna LNA noise figure
  • Easy to install – mounting clamp included

Specifications

Vcc =3.3V, over full bandwidth, T=25 °C

Electrical
Gain 25dB +3dB/-0dB typ.
Noise Figure <1.5dB typ.
-3dB Bandwidth 1555 to 1590 MHz
VSWR 1562 to 1662MHz <1.5
Lower Stop band Attenuation -35dB, f < 530 MHz
Upper Stop band Attenuation -35dB, f > 1620 MHz
Input Return Loss Zo=50 >12dB (1570 to 1580 MHz)
Output Return Loss Zo=50 >9dB (1570 to 1580 MHz)
Reverse Isolation >35 dB
Output 1dB Compression Level >-10 dBm
Output IP3 >0 dBm
Maximum Input Level -5 dBm
Supply Voltage Range +3 to 10 VDC Nominal
Supply Current 15 mA typical
Mechanicals & Environmental
Mechanical Size (body dimensions only) 59 mm L x 20 mm Dia. (2.32” L x 0.787” Dia.)
Connectors SMA Jack or TNC Jack
(Max TNC connector Torque 6.1 in-lbs)
Operating Temp. Range -40 to +85 °C
Enclosure Nickel-plated brass
Environmental RoHS and IP67 compliant
Warranty One year – parts and labour
Ordering Information
TW120 – 25dB gain In-Line Amp with SMA Jack 32-0120-0
TW120 – 25dB gain In-Line Amp with TNC Jack 32-0120-1
Download TW120 Datasheet

The information provided herein is intended as a guide only and is subject to change without notice. This document is not to be regarded as a guarantee of performance. Tallysman Wireless Inc. hereby disclaims any or all warranties and liabilities of any kind. © 2010 Tallysman Wireless Inc. All rights reserved.