GNSS Products

Documents

pdf Antenna Product Overview

pdf Comparing GNSS Antenna Performance

pdf White Paper – GNSS Antennas

pdf GNSS Antenna Presentation

pdf TW3072 Timing Antenna Install

pdf4000 Series White Paper – New Challenges for GNSS Patch Antennas

pdfTallysman TW4000 Series White Paper

pdfPatch Antennas for the New GNSS (GPS World Article Feb /12)

TW150 Datasheet

TW150 L-Band/GNSS 1 to 2 Signal Splitter

The TW150 by Tallysman Wireless is a professional grade 1 to 2 L-Band Signal Splitter, suitable for a wide range of L-Band and all GNSS applications, including GPS L1, L2, L5 and GLONASS L1 & L2. The TW150 splitter permits for two GNSS receivers to operate on one antenna, by allowing the DC voltage source to pass through Port 2 but blocked on Port 1.

The TW150 is housed in a robust weatherproof (IP67) clear anodized aluminum enclosure and is available with 3 x gold-plated SMA or TNC Jack (female) connectors.

Applications Features Benefits
  • L-Band Signal Distribution
  • GPS L1, L2 & L5 Signal Distribution
  • GLONASS L1 & L2 Signal Distribution
  • Galileo E1, E5 & E6 Signal Distribution
  • 1 to 2 GHz operating frequency
  • Low insertion loss 1.0 dB @ 2 GHz
  • VSWR <1.25 typ.
  • Max pass through current 200 mA
  • 50 Ohm port impedance
  • Clear anodized aluminum, IP67 housing
  • Gold-plated SMA or TNC Jack connectors
  • RoHS Compliant
  • Compact form factor
  • Allows use of two GNSS receivers on one antenna
  • Fits in line with antenna cable
  • Robust design
  • Suitable for harsh environments

Specifications

Electrical
Operational Frequency 1 to 2 GHz
VSWR (50Ω) 1.25 typ., 1.5 max
Insertion Loss <1.6 dB @ 2 GHz
Max Input Power 1.5 W
Max Pass Through Current 200 mA
Supply Voltage 18 VDC max
High Port Isolation >18 dB
Amplitude Balance 0.5 dB max
Phase Balance 2 degrees typ.
Mechanicals & Environmental
Size 1.81” L x 1.81” W x 0.669” H (46 mm L x 46 mm W x 17 mm H)
Weight 100 g (0.22 lbs)
Connectors 3 x SMA or 3 x TNC Jack
Operating Temp. Range -40 to +85 °C
Enclosure Clear anodized aluminum, IP67 compliant
Environmental RoHS complaint
Warranty One year – parts and labour
Ordering Information
TW150 – 1 to 2 L-Band/GNSS Splitter with SMA jacks 32-0150-0*
TW150 – 1 to 2 L-Band/GNSS Splitter with TNC jacks 32-0150-1*
* “25mA DC load (DCL) option on port 1″ can be provided if required by receiver
Download TW150 Datasheet

The information provided herein is intended as a guide only and is subject to change without notice. This document is not to be regarded as a guarantee of performance. Tallysman Wireless Inc. hereby disclaims any or all warranties and liabilities of any kind. © 2011 Tallysman Wireless Inc. All rights reserved.