GNSS Products

Documents

pdf Antenna Product Overview

pdf Comparing GNSS Antenna Performance

pdf White Paper – GNSS Antennas

pdf GNSS Antenna Presentation

pdf TW3072 Timing Antenna Install

pdf4000 Series White Paper – New Challenges for GNSS Patch Antennas

pdfTallysman TW4000 Series White Paper

pdfPatch Antennas for the New GNSS (GPS World Article Feb /12)

TW2010 – Datasheet

TW2010 Magnet Mount GPS L1 Antenna

The TW2010 by Tallysman Wireless is a professional grade, magnet mount, GPS L1 antenna, specially designed for industrial, agricultural and military precision positioning and timing applications.

The TW2010 features a high performance custom tuned ceramic patch element, 15 KV ESD circuit protection, a high gain two-stage low noise amplifier (LNA) with a mid section high rejection SAW filter. It covers the GPS L1 and SBAS (WAAS/EGNOS/MSAS) frequency band (1572.5 to 1578 MHz), and it offers great circular polarized signal reception, multipath rejection and out of band signal rejection.

The TW2010 is housed in a compact, industrial-grade weather-proof, magnet mount enclosure, and comes with a bulkhead SMA female connector or with 5 metres of cable and a wide range of connector.

Applications Features Benefits
  • High Accuracy & Mission Critical Global Positioning
  • Precision Agriculture, Mining & Construction
  • Military & Security
  • Avionics
  • Law Enforcement & Public Safety
  • Fleet Management & Asset Tracking
  • Very low noise LNA: 1 dB
  • Great axial ratio: >4dB at Zenith
  • High rejection SAW filter
  • High gain: 28 dB typ.
  • Low current: 10 mA typ.
  • ESD circuit protection: 15 KV
  • Wide voltage input range: +3.0 to 10 VDC
  • Weather proof housing: IP67
  • Great multipath rejection
  • Increase system accuracy
  • Excellent signal to noise ratio
  • Great out of band signal rejection
  • Ideal for harsh environments
  • RoHS compliant

Specifications

Vcc = 3V, over full bandwidth, T=25°C

Antenna
Architecture Custom single-feed ceramic patch
Antenna Gain (100mm ground plane) 4 dBic at 90°
Axial Ratio (over full bandwidth) 4 dB at 90°, 6dB at 20°
Electrical
Architecture Input LNA, mid section SAW filter, output LNA
Filtered LNA Frequency Bandwidth 1572.5 to 1578 MHz
Polarization RHCP
Gain 28 dB min. at 90° (at 1575.42 MHz)
Out-of-Band Rejection
<1560 MHz
>1600 MHz
>1620 MHz

>42 dB
>31 dB
>45 dB
VSWR (at LNA input) <1.5:1
Noise Figure 1 dB typ.
Supply Voltage Range (over coaxial cable) +3.0 to 10 VDC nominal
Supply Current 10 mA typ.
ESD Circuit Protection 15 KV air discharge
Mechanicals & Environmental
Mechanical Size 57 mm dia. x 15 mm H
Connectors Bulkhead SMA female, or SMA male on flying lead – other connectors optional
Cable RG174 / 5 metres, custom lengths optional
Operating Temp. Range -40 to +85 °C
Enclosure Radome: ASA Plastic, Base: Zamak White Metal
Weight 150 g
Attachment Method Magnet or permanent (pre-tapped 4 x 6-32UNC)
Environmental IP67 and RoHS compliant
Shock Vertical axis: 50 G, other axes: 30 G
Vibration 3 axis, sweep = 15 min, 10 to 200 Hz sweep: 3 G
Warranty One year, parts and labour
Ordering Information
TW2010 – GPS L1 antenna, 5 metre cable, SMA Male 32-2010-0
TW2010 – GPS L1 antenna, Bulkhead SMA Female 32-2010-7
Download TW2010 Datasheet

The information provided herein is intended as a guide only and is subject to change without notice. This document is not to be regarded as a guarantee of performance. Tallysman Wireless Inc. hereby disclaims any or all warranties and liabilities of any kind. © 2010 Tallysman Wireless Inc. All rights reserved.